Buick

Discussion in 'Inquiries' started by macbuick, Mar 16, 2010.

  1. macbuick

    macbuick David

    This is only my 4th mail to you...and still no respons ..... are you closed??:spank:

    Hello,

    I'd like to order some parts and i have some questions.

    Is it possible to order TA-1325B (valve covers-power brakes-no airco) with the following option:
    - one cover with a hole for a fill cap TA-1335 and one 1/2in NPT hole.( i d like to fit AN to NPT adapter fittings with hose and a breather tank)
    - the other cover with only a 1/2in NPT hole.(also for the AN fitting to breather tank)
    (the two 1/2in holes should be bored to the firewall side).
    Do you sell valve cover bolts with the TA-1325B ?

    I already have a TA intake for my 350 (iron heads) with a ATI Procharger , is it better to install a TA 1735 (stock intake gasket) or another intake gasket?
    Are the TA 1239A (rubber and seals) already included with the TA 1735?

    Do you have an ideal cam to suit a supercharged engine?
    duration +.010-12
    lift +.010
    lobe separation 114 range

    Could you quote the total amount and the shipping costs to Belgium -EUROPE for this order?

    TA-1532 fuel pump cover
    TA-1325B valve covers (with the previously asked options)
    TA-1335 fill cap
    TA-1722 header gasket
    TA-1740 sealer
    TA-1700-350 oil pan gasket
    TA-1535A180 thermostat
    TA-1535B350 coolant by-pass hose
    TA-1703 thermostat gasket

    Thanks in advance

    Best regards

    David
     
  2. moleary

    moleary GOD Bless America

    who is the intended recipient of this- T/A Performance?
     
  3. David G

    David G de-modded....



    Of course, this IS in the TA Perf forum. :)



    David, this section is operated by Mike Jr, son of Mike Sr the owner. Mike Jr is a full time college student, so this area doesn't get his full-time attention. Have you been sending them emails? PM's thru the board? Mike usually checks in here frequently, I'd expect some response before long.
     
  4. DaWildcat

    DaWildcat Platinum Level Contributor

  5. macbuick

    macbuick David

    I tried on the website address and also here on the forum.
    I'm gonna try with the sales@ ...

    Thanks
    David
     
  6. TABuickMike

    TABuickMike Michael Tomaszewski Jr

    If you sent it to TAPerf@aol.com it may get looked over as my mom manages that account in her spare time which is near to none so a lot of emails get looked over because she doesn't have time to read through them all and a lot are just spam and such. I removed the sales@taperformance.com from the site because I have such little time to check it while in school, but if you send an email before friday afternoon I'll get it, otherwise send me a PM.
     

Share This Page