1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

BUICK 300 CUBIC INCH PARTS LOT & ST300 TRANSMISSIONS

Discussion in 'Parts for sale' started by CarCrave, Apr 28, 2018.

  1. CarCrave

    CarCrave New Member

    Here I have an assortment of vintage Buick parts. Need gone fellas! Please feel free to make an offer.

    300 cubic inch Buick Valve Covers Pair for 1964 1965 1966 1967 300cid (They have been cleaned/sandblasted) $50 OBO

    300 cubic inch Buick Valve Covers Pair for 1964 1965 1966 1967 300cid ( Original patina) $40OBO

    1966 1967 Buick 300 cubic inch Exhaust Manifolds (They have been sandblasted/painted) $150 OBO

    1966 1967 Buick 300 cubic inch Exhaust Manifolds (Not cleaned or sandblasted) $125OBO

    1966 Buick 300 cubic inch engine (Including pistons, crank, oil pan, cam, water pump, timing set, timing cover) (No heads or intake) Very dirty, but no rust! $100 OBO NEED GONE!! IT IS IN MY TRUCK BED!

    1966 Buick 300 cubic inch engine and Trans (ST300 Switch pitch) JUST PULLED OUT (Including pistons, crank, oil pan) (No heads or intake) $175 OBO NEED GONE!! IT IS IN MY TRUCK BED!

    1966 8.5 10 bolt Limited slip Rear $500 COMPLETE with brakes!!

    Two sets of 1966 300 cubic inch engine Iron Heads (Including Valves/springs) $150 a set OBO

    ST300 Switch pitch Transmissions with BOTH BOP and CHEVY bolt pattern!! (Have two prong switch on side) includes the switch pitch torque converter. Pretty Rare! $200 OBO

    Switch pitch carburetor kick down switch $75 OBO

    Rochester 2 Jet Carb $100OBO

    Two power steering pumps with mount $50 OBO each

    1966 Buick 300 cubic inch Wildcat 310 Air cleaner $40 OBO

    Buick 300 cubic inch rocker arm assembly set $80 OBO

    I will sell everything separately or will give a deal if sold as lot. More items available, to much to list.

    I respond to email, as well as phone calls/text message. Leave a voicemail if I do not answer.

    Email: carcravecontact@gmail.com
    Phone: 610-931-3297

    Location: Drexel Hill, Pennsylvania

    Thanks, Tyler
     
  2. CarCrave

    CarCrave New Member

    (05/02/2018)
    THESE ITEMS HAVE BEEN SOLD!!

    BOTH ST300 TRANSMISSIONS

    BOTH 300 CUBIC INCH MOTORS
     
  3. Dr. Evil

    Dr. Evil Silver Level contributor

    What gear is the rear end and is it buick?
     
  4. Vincent ventura

    Vincent ventura New Member

    You wouldn’t happen to have aluminum heads for a 64 Buick?
     
  5. Bzltyr

    Bzltyr Member

    I have a set that are usable but need a few helicoils including spark plug holes.
     
  6. Smalldog221

    Smalldog221 Member

    Looking for the cast iron 4 barrel intake for the 65 300 casting 1366695
     

Share This Page