I need help. I need this bolt and alot of them. I have only a couple and need about 50. This is for my Kickdown bracket. They are on a 3/8 hex head and 1/2 inch long with a point. That is what my wife's original stage 1 has on it, so I need to have them with my bracket. Can you help me??
is there an ace hardware in topeka? ours here is awsome with automotive hardware... better than the auto parts stores.if i wind up that way ill see if they have them. i bet they do... what finish...they may have them in black oxide. if they don't a nickle plated can be converted with some gun blueing.
I havent found anything here. I would do either flavor color if I can find them without the screw bit slots in them. I found them with screw bit slots all over the place. The plain janes are scarce...like nonexsistant
I may have a few thousand of those in the shop Mike. I'll check tomorrow. Not sure if they are 1/2" or 1".
Here is a better picture of what Im after. Hex head with washer bottom and black or silver is ok with me. As long as it looks correct like in the picture. Let me know thanks!!! :TU:
I just found the bolts and they are on the way. and for the record .45 each is WAY out of line. (Im in the wrong business!!) I got the bolts I need for the price of 6 of that site you sent me George. If anyone needs bolts in mass quanity call 1-800-362-0628 Ziegler Nut and Bolt.....Canton Ohio