This ad is for people who can pickup the parts in the area of either Redlands, CA or Big Bear Lake, CA. I CANNOT ship these! So if you live elsewhere, you're going to need to have somebody pick them up in person.... OK, on to the ad: Just pulled these stainless moldings out of long-term storage, been in there since the mid-'90's when you could actually find these cars as parts cars (and now you cannot...) Good luck finding these moldings at the Pomona Swap, either... And really, you could easily spend more money on gas just driving around trying to find these, to no avail... So that leaves the options of purchasing entire cars just to get your moldings ($$$), or purchasing new Chinese (IF even available), or... jumping on these original factory moldings here (recommended!) There is only ONE of each molding listed, grab yours while you can! --'70 Buick Skylark/GS trunk lip molding, $50 --'66 (and maybe '67??) Buick Skylark/GS wheelwell moldings.... have left front, left rear, and right rear. $50/each --'66 (and maybe '67??) Buick Skylark/GS trunk lip molding... this one here has a small mash in the very center... probably very workable.... $10 for this one, or I will throw this one in if you buy all three of the '66 Buick wheelwell moldings listed above --Also have a bunch of nice quarter-panel moldings off a '58 Buick 2dr Special, will sell all that I have for that car for $150 as a group lot. I could probably meet you in the Redlands area on a day that I happen to drive down there, otherwise you'd need to come to my place in the Big Bear Lake area. If interested in making a purchase, then please e-mail me DIRECT at blown394olds@yahoo.com
