Hey guys, So I finally got around to measuring my cranks journals and the main caps on my 350. I don't have connecting rods...yet. The measurements were as follows: Main Caps: 1st: 3.2400/3.2394 2nd: 3.2390/3.2405 3rd: 3.2410/3.2410 4th: 3.2410/3.2410 5th: 3.2390/3.2410 (the dual measurements are for measuring vertical then horizontal) Crank Main Journals: 1st: 2.778 2nd: 2.778 3rd: 2.779 4th: 2.779 5th: 2.778 Crank Rod Journals: (dual measurements are for the forward and rear part of the journal, where a rod would be located) 1st: 2.103 & 2.103 2nd: 2.103 & 2.103 3rd: 2.104 & 2.104 4th: 2.104 & 2.103 Not sure on the math to figure how to select a bearing size. I will be ordering new rods from TA maybe as soon as next week. I guess that will be when I can determine the correct bearing size for the rods. Thanks a ton, ~Scott