Anyone With an Unwanted Power Steering Bracket 455

Im looking for a power steering bracket for a 1973 Buick Lesabre/Centurion.

The one I want is actually from a 71 or 72 that does NOT have a mount for the air pump, as I removed my air pump and dont want the ugly reminder of it.

THanks!

:3gears:

 

Is this what you are looking for? It's Nos, $22 to your door.

 

Looks good. I need the other side too because the bracket is a two piece one. Also, im not sure if the pump and pulley is the same.

Any advice ?

Gary

 

Let me get back to you and i'll check and see what we have here in the back woods.

 

You may have a problem with hole alignment on that all-steel bracket with a 72 or later pump that mounts on the aluminum bracket. On my 72 Stg 1 car, I wanted to eliminate that massive chunk of aluminum and went and got this bracket---the holes were slightly off but that may have been because it was a Abody pump(maybe holes in pump were situated differently. Went and got another pump and solved the problem--running the same all-steel 2 piece bracket as shown above now. Patton