77 regal, is the swap the same

Discussion in 'V-8 Buick Powered Regals' started by calvin dubose, Aug 15, 2007.

  1. calvin dubose

    calvin dubose Calvin D.

    A buddy of mines just bought a 77 regal with a V6 in and wants to due a engine swap is it the same as the 79 thru 80's models any pics
     
  2. Floydsbuick

    Floydsbuick Well-Known Member

    Didn't Cody just do the same swap? I think theres a thread about this.
     
  3. Stage1 Jeff

    Stage1 Jeff Guest

    should be just as easy to do, as doing a G body swap
     
  4. alec296

    alec296 i need another buick

    a buick 350 will swap with v6 mounts or get 350 mounts/pads from a 350 buick car and bolt it up,v6 pulleys and brackets go on to 350s
    455 is like the gbody but you might get lucky and find some bolt holes line up
     
  5. v8regalowner

    v8regalowner Silver level contributor

    i did a 77, from a v6 to the 350. its an afternoon project if all of the bolts come out nice. didnt have to move the frame pads, all of the accesory brackets bolted right on, and the 77 i did had a shroud that was the v8 with a tube stapled onto it to make up for the space. not sure if they all came that way but its definatly stock.it was a thousand times easier then puting the 455 in my 84.
     
  6. sean Buick 76

    sean Buick 76 Buick Nut

    drop in replacement. no mods.
     
  7. alec296

    alec296 i need another buick

    you will find the v6 mounts are really soft, i used grand nat poly mounts,
    they do make the engine seem rough but they wont strech like the v6 mounts
    not cheap at 160 a pair
     
  8. calvin dubose

    calvin dubose Calvin D.

    I will let my buddy know, nice car too 24K original miles and clean as the board of health. but when he took me for a ride in it it wouldnt even get out of its own way, it needs a 350 bad......
     
  9. Searcher

    Searcher Member


    fix't




    :grin:
     

Share This Page