Hutch, Sherman and Assc carries the inner structures your looking for. Mostly Chevelle & LeMans stuff, but will fit/function the same. As for quarters and so forth, better to get used rust free from GS Gil on this board. He will ask a good price, but the stuff is excellent. How'd the heads work? Jim
I have some fenders and I need to look at the doors closer. I am also not that far away!! Email me at mike@mrbuick.com so I can shoot some photos for you of what I have
if you were closer i have a set of rust free floor pans and trunk pan from a 68' skylark they are cut the full length so they can be separated at the orig. factory seams and placed in another car and look factory, and they have all the orig. braces still attached. i also have a repro left 1/4 panel. it is a tabco brand. from what i have heard and checked around the die for the 1/4's was damaged and they are not being made at this time and the co. isnt sure if the die will be repaired. i have inner fenders too, the driver side is very nice the pass. side has some rust on the back lip where it bolts to the outer fender but i will include another pass. fender to use as a donor. if you feel like a road trip let me know :Brow: