68 Skylark rear fender trim molding I need a right rear fender trim for a 68 lark. If you have both and they are in good shape I might be interested in the pair. Thanks
Wheel trim/molding Thanks but no -- I need the one that goes around the wheel opening. I am not sure whether GS"S were the only ones that had them.
The GS cars would have the full length wheel opening mouldings, while a Skylark Custom, maybe Skylark too(?) would have the shorter mouldings that stopped where they would meet the horizontal SS trim piece. If my facts are off just a bit, I'm sure one of our true 68/69 experts will correct me. These pieces show up on ebay pretty frequently, used.
do you need the full length wheel well mouldings? i have a set from a '69 if they are the same. they are at another location, i can get them this weekend if you want a picture.
Moldings I am not sure full length is the correct term. I need the moldings that screw into the fender lip around the whell opening. Somewhat semi-circular in shape. Let me know if thats what you have. Thanks ...
Full-length simply means they extend all the way down to the bottom of the wheel well opening. The shorter style only go about halfway down the sides of the w/w opening. 68 and 69 pieces should be the same. Visually they are obviously shorter then the full length ones. I thought I had pics I could post, but can't find them, yet.
the set i have are from a '69 skylark custom without the chrome strip that ran the length of the car. i'm pretty sure that's what you want. i'll get some pics this weekend.
Here are the short ones (middle of the picture) . I bought them if ever I wanna run "skirtless" . That would make a continious line . Problem is that my side molding would need some trim to not overlap the "short" wheel well molds.aybe 1/4 - 3/8 but If I do this there will be a "space" in between the section of the skirt if I decide to take them back on ..... o No: