68-9 Skylark parts

Discussion in 'Parts for sale' started by cole, Nov 21, 2010.

  1. cole

    cole Platinum Level Contributor

    69 engine harness no cuts $25
    69 complete under dash harness no cuts $35
    69 RH hood hinge $20
    68-69 intermediate ebrake cable and hardware $10
    69 white sunvisors with clean swivels $15 pair
    ash tray assembly,it will clean up nice $10
    69 lower steering colunm to firewall clamp,nice and clean $10
    69 sail panel emblems one is good driver the other so-so $10 pair
    68 working am radio and bezel no knobs $25
    68-9 eye brows will need some small dent repair but very restorable$15 a set or $20 for all 4
    68-9 delux seat belts in gold $50 for all
    68 buckskin window cranks $25 for all
    68 & 69 heater controls all work nice and smooth the 68's have nice faces,cables that are attached have all their mounting tabs $25 each
    These are all + shipping.I will definatly get more pictures of indavidual items apon request
     
  2. James P

    James P Founders Club Member

    Hi Cole.

    Dibs on the dome light base and lens combo. What is the diameter of each, or the parts numbers on them please?
     
  3. chrisc1541

    chrisc1541 chrisc1541

    i will take a 68 heater control
    please send me a total to area code 02062
    thanks
    chris
     
  4. cole

    cole Platinum Level Contributor

    Hi Jim
    Hows it goin?here are some better pictures of the courtesy lites.They are part # 9835738 They are the same diameter 3 1/4" and are the same all around as other courtesy lights but you can see in the comparison photo that the mounting holes are at the bottom instead of the sides,I think they came off my 73 Electra.I was thinking of redoing the mounting tabs or drilling to new holes on the sides.They would be $22 including the shipping............Cole
     
  5. cole

    cole Platinum Level Contributor

    Hi Chris PM'D you..........Cole
     
  6. James P

    James P Founders Club Member

    Thanks for the pics and info Cole. I'm going to pass. Those are a matched set of sail panel lights. I'm looking for the big center lens and base.
     

    Attached Files:

  7. scott kerns

    scott kerns Silver Level contributor

    Hey Cole can I get some close up photos of the sunvisors? Specifically the brackets. Would you be able to measure the length for me? Also may I have a front picture of the fuse block too?

    Thanks.

    Scott
     
  8. GSEric69

    GSEric69 Still learnin'

    Cole, Could you get a close up picture of the front of the 69 heater control panel?
     
  9. cole

    cole Platinum Level Contributor

    Here yah go.Moves freely and all the cables are good
     
  10. cole

    cole Platinum Level Contributor

    Hi Scott
    Here are some pictures.The sun visors measure 16 1/2" end to end
     
  11. cole

    cole Platinum Level Contributor

    Kinda thought you may have been wanting the center roof style Jim.I know I have some lenses,I will check and see if I have any bases............Cole
     
  12. James P

    James P Founders Club Member

    Thanks Cole. :TU:
     
  13. GSEric69

    GSEric69 Still learnin'

    Thanks Cole. How much is shipping to Red Lion, PA 17356?
     
  14. cole

    cole Platinum Level Contributor

    Hey Jim
    Here are a couple I have.........Cole
     
  15. cole

    cole Platinum Level Contributor

    Shipping to PA would be $12
     
  16. James P

    James P Founders Club Member

    Sweet! I'll take that bottom one. Shipping will be to Milford NH 03055, pm the total and I'll send payment right out.
     
  17. OhioGS400

    OhioGS400 Well-Known Member

    Cole-I'm looking for a nice 68 heater control face plate- do you have one?
    Thanks.
    Randy Brooks
     
  18. scott kerns

    scott kerns Silver Level contributor

    Hey Cole I'll pass on the fuse block as it won't work for my application. Sorry to be a pain over a piddly thing like sunvisors, but I'm replacing mine in my 66 and I'm hoping they are the same. The bracket looks identical and mine has part number 05716816 for the passenger side bracket. I've included a picture with a guess of what you measured. Thanks for your patience. :TU:

    Scott
     

    Attached Files:

  19. cole

    cole Platinum Level Contributor

    PM'd you Jim
    Here is another shot,showing a crack...........Cole
     
  20. cole

    cole Platinum Level Contributor

    Hey Scott
    No problems with getting more pictures and asking questions.You are correct in my measurement on the visor.The swivels carry the same part # as yours.Here is another picture of them
     

Share This Page