67 Top frame repair

Discussion in 'The ragtop shop' started by mineseats9, Dec 10, 2007.

  1. mineseats9

    mineseats9 Gold Level Contributor

    A friend in Denmark has a 67 Lark Vert with a sagging top. I have a spare top but, I don't know which parts I can take off to fix his problem. Is there a removable bracket where this top is sagging? Any suggestions are appreciated. Brian
     
  2. wildcattommy

    wildcattommy New Member

    To repair this frame you must remove rear seat and inner quarter trim.then loosen the cantalever bolt,on the inner lower frame rail. this bolt is located at the end of a flat bar that runs from the top of the quarter window down on an angle toward the rear. this area should have serrations in a steel plate. after loosening this bolt, lift top frame about 10 inches off top of windshield. then push upward in area of sag, hold this up and tighten bolt at the same time. that should do it .good luck Wildcattommy
     
  3. mineseats9

    mineseats9 Gold Level Contributor

    Thanks Tommy. Now I need to try and make this understandable to my friend who barely speaks English. Aprreciate the help and I'll let you know how he does, Brian
     
  4. mineseats9

    mineseats9 Gold Level Contributor

    Thanks Tommy. Now I need to try and make this understandable to my friend who barely speaks English. Aprreciate the help and I'll let you know how he does, Brian
     

Share This Page