1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

66 BT Code Super Turbine 400 Trans

Discussion in 'Parts for sale' started by 66kooch, May 23, 2021.

  1. 66kooch

    66kooch Well-Known Member

    I have a 66 BT code 400 transmission for sale. No torque converter.
    Located in Hanover PA
    $150
     

    Attached Files:

  2. Steve Triplett

    Steve Triplett Well-Known Member

    Would you ship?

    Steve
     
  3. 66kooch

    66kooch Well-Known Member

    Sure, but buyer pays shipping and packing supply costs.
    This is heavy so needs to go on a small skid. Probably ship via fastenal unless you have other suggestions
     
  4. Steve Triplett

    Steve Triplett Well-Known Member

    I have never shipped or had anything that big shipped to me, is there fastenal outlets where I can pick it up in Connecticut? My zip is 06524
    Thanks so much!

    Steve
     
  5. telriv

    telriv Founders Club Member

    Take a ride & pick it up.
     
    bill lagna and TrunkMonkey like this.
  6. Steve Triplett

    Steve Triplett Well-Known Member

    To be sure we are not wasting our time does this Tranny fit a 300? If so, Here is a location near me, think you could figure out how much it would cost for shipping?

    Thanks
    Steve
     

    Attached Files:

  7. Matt Knutson

    Matt Knutson Well-Known Member

    Check with DANO on this board - he may be able to get it close to your place, as, I know he has a trip to CT planned
     
  8. wkillgs

    wkillgs Gold Level Contributor

    No this one fits a 401-425. Note the 'round' top of the bellhousing.
    For a 300 engine you can use a later TH350 with the BOP bellhousing or a BOP TH400. Chevy and Buick Nailheads are different and won't bolt up.
    If you want the ST400 with the switch pitch converter, I believe you are limited to one that came behind a '67 340/400/430.
     
  9. Steve Triplett

    Steve Triplett Well-Known Member

    Thanks for the info! Have a great weekend!

    Steve
     
  10. Steve Triplett

    Steve Triplett Well-Known Member

    Sorry kooch I will have to pass, I should have asked this question before I tried to buy.
    Have a great weekend.

    Steve
     
  11. 66kooch

    66kooch Well-Known Member

    No problem
     
  12. Gringo Mark

    Gringo Mark Member

    Is this TH400 still available?

    Thanks,
    Gringo Mark
     
  13. 66kooch

    66kooch Well-Known Member

    Mark, yes it is still available
     

Share This Page