Hi, I recently looked at my factory manual and discovered I am missing the ball that rides in the equalizer and slips over the lever on the bell housing does anyone remake this or have measurements on one so I could get one remade and what material it might be? Thanks for any info,
Jim, No one remakes that as far as I know. It's hardened to some degree, because the lever wears from contact with the ball. Some has to have one you can dimensions from. If you don't get a response, I'll unscrew mine and take some pics, measurements. Mark
Mark, Yep that's it exactly I put together my stick setup from a few sources and missed that piece Looks to be steel can you get me inside and outside diameter and thickness along with approx radius Thanks in advance Jim
Jim, Will do. I don't have any mic's, but have a friend with quite a few. We'll get measurements as close to OEM as we can. Give me a day or two. Mark
