1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

64 Wildcat, Le Sabre horn contacts

Discussion in 'Parts wanted' started by GSJohn, Apr 19, 2005.

  1. GSJohn

    GSJohn BUICK is a beauty too!!

    Hi all,.......
    I am looking for a set of horn contacts and any pieces needed for my horn bar for a 64 big car steering wheel. Wildcat, Le Sabre, etc.... I have the horn bar, but need the contacts. It has one screw holding down one end and 2 "clips" holding down the other. If anyone can help me, I certainly would appreciate it. If you need a picture, I can take one and put it on this thread after work or noon today.
    Thanks again for your help.
    John
    :grin:
     
  2. GSJohn

    GSJohn BUICK is a beauty too!!

    any help would be greatly appreciated.......or even point me in the right direction.
    Thanks again!
    John
     
  3. GSJohn

    GSJohn BUICK is a beauty too!!

    That would be great Joe,.....can you email a photo of it to me?? Or would you like me to email a photo of my steering wheel to you? I have the horn bar and just need to contact pieces, but if you are selling them together, and they are the correct ones, I'll take it.
    Let me know......
    Thanks,
    John

    :bglasses:
    Here is a photo of the steering wheel minus the horn bar. Note the narrow ends where the bar sits. I need the contacts for the narrow ended horn bar.
     
  4. GSJohn

    GSJohn BUICK is a beauty too!!

    Thanks Joe,.......I appreciate your help......let me know if you find it.
    Even if I have to buy the contacts with the horn bar, I will.
    John
     
  5. cadlights

    cadlights Well-Known Member

    Horn contacts.

    Do you have a part number? I have NOS that I can't ID.
     
  6. GSJohn

    GSJohn BUICK is a beauty too!!

    Sorry, I don't have the part #, but perhaps someone out there can help us with that.....
    Anything else we can do to see if that is the right one? Start a new thread perhaps?
    John
     
  7. cadlights

    cadlights Well-Known Member

    horn contact

    I will post the part # I have when I get home tonight. Keith.
     
  8. cadlights

    cadlights Well-Known Member

    Horn contact number

    The part # on the one I have is 398986. Anybody? Keith.
     

Share This Page