OK here is what I have, early 70's 455 ,with the aluminum ac/alt mounting bracket that bolts to the block,same with the ps bracket.What I don't have ,and need ,are all the other ac/alt,ps steel brackets and hardware.This motor was in a 70 gs and now is being transplanted into a 66 gs w/air. Also need the 3 groove crank and 2 groove waterpump pullies, dipstick, intake manifold water neck, dist. hold down, HEI dist.,TH400 dipstick and tube,TH400 yoke,Trans is a 68, BA code short tail. I'm sure this list will grow,but this is a start, THANKS!!!!!Greg.
I have a dipstick and tube from a '67 sp400, and a yoke from the driveshaft that will fit the tranny. Send me a PM if you want it. :bglasses:
