1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

455 Flexplate, A-pillar gauges, Headlights & eyelids

Discussion in 'Parts for sale' started by Dstoltenberg, Jun 29, 2010.

  1. Dstoltenberg

    Dstoltenberg Well-Known Member

    Couple items left over from my garage sale.

    Buick 455 Flexplate, 15$ + S&H. Removed from a 76 motor. In good working condition, looks like a few teeth on one side were worn down, but still works fine.

    Halogen Headlights & Eyelids- Removed these form a 70 chevelle, should fit your Skylark or other A-body. Unsure of the brand or what they're worth, but i do know that they are Halogens. I thought the chrome Eyelids were pretty cool, I had never seen a set before. they have some light surface rust in a few spots as visible in the pictures. Lets say 20$ plus S&H?

    Aftermarket Autometer A-pillar gauge cluster- 10$ plus S&H. Fits two 2 1/16" gauges. Used this in my skylark for a while, but decided to go in the dash with my gauges instead. Much better than mounting two gauges below the dash where you have to take your eyes off the road to look at them. Some light scratches, but overall in very good condition, no cracks or anything.

    Holley 0-9 PSI Fuel Pressure Regulator- I bought this then realized I needed the Regulator with the provision for a return Line. This has one inlet and two outlets. It includes the FPR, bracket, mounting screws, Marshell Fuel pressure gauge, two 3/8" barbed hose fittings, and the fittings used to mount the gauge to the FPR. This entire setup is almost new, I had it installed in my Regal for troubleshooting the new engine, then removed it. Probably had a gallon of gas moved through it total. I have 80$ tied up in this little set-up so I'm asking 40$ shipped.

    Two brand new Exhaust manifold flanges for Buick 350 and Mopar 440 Engines- Pretty sure these work with 455's too. I paid 40$ for these aat a local exhaust shop, only flanges in town that would work with my 350 manifolds, and i never ended up using em. 10$ plus S&H

    Autometer shift light- 10$ plus S&H.

    I also have a pair of Buick 455 Valve covers, also removed from the 76 engine. They were originally Blue, painted orange at some point, and then black. Great candidate for a restoration job, no dings or dents. If someones interested I can take some pics. 10$ plus S&H.

    I am located in Billings, MT, and can be reached here on v8Buick. If you dont like the price of something, Make me an offer!!!!
     

    Attached Files:

    • f1.jpg
      f1.jpg
      File size:
      57.1 KB
      Views:
      3
    • h1.jpg
      h1.jpg
      File size:
      77.2 KB
      Views:
      17
    • ag1.jpg
      ag1.jpg
      File size:
      73.4 KB
      Views:
      22
    • msc1.jpg
      msc1.jpg
      File size:
      78.7 KB
      Views:
      10
  2. thebuick

    thebuick Well-Known Member

    1 st in line for the headlights,ship to 01501,how do you want your $$,can i have them for this weekend? you can pm me,
     
  3. bostongsx

    bostongsx Platinum Level Contributor

    in line for the a pillar gauges and shift light
     
  4. staged70

    staged70 RIP

    I'll second on the A pillar guage pod
     
  5. Dstoltenberg

    Dstoltenberg Well-Known Member

    PM's sent to both of you. staged70 your second in line
     
  6. Dstoltenberg

    Dstoltenberg Well-Known Member

    Pillar gauge cluster & shift light sold to bostongsx
     

Share This Page