3-core Radiator

Not sure what this fits, measurements provided. Not tested but is not green or soft at bottom, looks decent. For auto trans. Width at narrow part of tanks is 33" and is 18.5" tall

$40

Pick-up SE WI or DELIVER TO NATS

 

Are there any Names or Numbers or Tags to ID this With...???

Jim Jaeger

 

"Harrison" on tank is only thing I see

 

Found it on pass side tank, not seeing on driver side. Thanks Brett

 

Just to help,
For the guys that care, that is a 72 and newer style radiator.

The radiator cap is sitting on an angle.
Duane

 

Thanks Duane...I need a 70..
I'm sure someone can use a 72...!!!

 

Here you go Jim. This'll keep you busy for a few min. You need an SJ (w/o AC, IA/CF tanks) or an SW (w/AC, IA/XS tanks). Not sure we ever figured exactly where the "SS" was used but it's the same tanks as SJ.

http://www.v8buick.com/index.php?th...tion-for-a-bodies.373396/page-10#post-3300676

 

...likely newer and not '72 GS, since '72 began angled filler and all '72 GS passenger tanks begin with "C." Sorry, I only have data for '68 - '72.

Dano, SS used in '68 w/A/C, and '71 after 10/26/70 w/A/C, and Stage1 no air

 

Thanks! I missed that in the thread.

 

...Dano, that info may not have been posted specifically, lost track around 150 posts. Doc is essentially done, I'm just missing tag info for '72 CL. I'll wait a little while longer while I'm creating combined '68 - '72 chart, then post results here for review/corrections...

 

...apologies to OP for hijack...

 

That was my fault I think. Sorry to the OP. We can delete the posts if you want.

 

It's cool, we can all learn from it

Thanks

Jeff