1974 BUICK APOLLO COUPE v8 PARTING OUT, 60415, IL

Discussion in 'Car Part-Outs' started by dedsleds, Dec 19, 2013.

  1. dedsleds

    dedsleds KEEP ON TRUCKIN'

    THIS IS A WRECK, ALL BODY PANELS ARE JUNK, FLOORS JUNK, core support junk, NO SIDE GLASS OR REAR BUMPER, FRONT BUMPER JUNK, BUT..... HAS BUICK 350 2BRL 350 TRANS, COMPLATE A/C SETUP, POWER DRUM BRAKES, UNCUT DASH INSERT, NICE SIDE INTERIOR PANELS, GOOD HEADER AND TAIL PANELS, WIPER SETUP....

    HASN'T RUN IN YEARS, PARTING THE ENGINE APART


    A/C COMPLETE SETUP (FIREWALL) AND DASH STUFF 150.00/ALL
    COMPLETE 350 BUICK ENGINE BRACKET/PULLEY ASSEMBLY W A/C COMPRESSOR 150.00/ALL
    3 CORE RADIATOR 50.00
    A/C FAN SHROUD, 2PC 85.00
    HEADER PANEL 35.00
    TAIL PANEL W/LIGHTS/LOOM 85.00
    NICE DASH INSERT 150.00
    GOOD DOOR PANELS 200.00/PR
    REAR SIDE PANELS 50.00/ALL
    SPEEDOMETER PLASTIC COVER. NICE 35.00
    BUMPERETTE RUBBER L/R 25.00/PR
    HOOD HINGES 45.00/PR....LITTLE STIFF
    HOOD BOLTS/STOPPERS/LATCH/SPRING 15.00/ALL
    HEADER PANEL FILLER PANELS 20.00/PR (underhood)
    14x6 steel wheels 5 x 4 3/4 (need blasting) 45.00/3
    trunklid springs 10.00/pr
    L/R INTERIOR SAIL PANELS AND TRIM LOT 35.00/ALL
    OK DASH ASHTRAY INSERT 5.00
    SOFTRAY REAR WINDOW 25.00
    REAR WINDOW LOWER TRIM PCS (2) 15.00/BOTH

    MORE TO COME, OPEN TO OFFERS

    AOME PICS: http://www.ebay.com/itm/1974-BUICK-...Parts_Accessories&vxp=mtr&hash=item565f55325f
     

    Attached Files:

    • 001.jpg
      001.jpg
      File size:
      77.9 KB
      Views:
      108
  2. dedsleds

    dedsleds KEEP ON TRUCKIN'

    well the pulley setup has issues, lower pulley rotted, I had to cut the bolt off under alternator, knicked lower bracket.....I'd do 100.00 shipped for all of it minus the a/c compressor, includes air pump setup

    the a/c evap box (blower side) is damaged....outside pc good 15.00
     

    Attached Files:

    • 002.jpg
      002.jpg
      File size:
      90.7 KB
      Views:
      56
  3. Carry Gross

    Carry Gross Well-Known Member

    I could be interested in the L/R interior rear sail panels if they are in good shape. Mine are dried out pretty bad and the lower rear corners that bend and curve to the horizontal contour of the rear window are starting to chip off and show age. If yours are better please take and post a few close up pics and we can work something out. Thanks
     
  4. dedsleds

    dedsleds KEEP ON TRUCKIN'

    pics
     

    Attached Files:

    • 002.jpg
      002.jpg
      File size:
      69.1 KB
      Views:
      38
    • 003.jpg
      003.jpg
      File size:
      40.9 KB
      Views:
      34
    • 005.jpg
      005.jpg
      File size:
      44.2 KB
      Views:
      34
  5. Carry Gross

    Carry Gross Well-Known Member

    Thanks for the super fast pics! If the inside where the plastic mount pegs slide in are intact and not broken Ill go ahead and try yours. 40.00 Shipped? Ill paypal you if that's ok, and all I need are the sail panels only , not the other rear window trims, ( Id like to have them but shipping and boxing those would really add hassle and $) . Im in Ohio 45013. If this works for you, contact me @ cgross1600@fuse.net and we can get it done. Thanks again
     
  6. dedsleds

    dedsleds KEEP ON TRUCKIN'

    I can't do 40.00 shipped...what mounting pegs are you talking about, I could double check, back side?....40 shipped after everything leaves me w/10-15 dollars....worth a little more than that to me I think....
     
  7. Carry Gross

    Carry Gross Well-Known Member

    Ok, didn't mean to lowball you. I must be greatly under estimating shipping, (wouldn't be the first time). Ill keep your stuff in mind as I start toying with the car mid-Jan. Once I get my sail panels out Ill have a more realistic view of their size and condition and which way to go from there. Thanks for your pics , and time.
     
  8. dedsleds

    dedsleds KEEP ON TRUCKIN'

    no problem, let me know, it's the oddball size of these that adds to shipping costs, would be cheaper if going to a business
     
  9. dedsleds

    dedsleds KEEP ON TRUCKIN'

    Pending sale on engine/trans

    SCRAPPED DOORS AND FRONT CLIP
    A/C BOX ON FIREWALL JUNK


    LOWER REAR SEAT FRAME AND FOAM 5.00
    FRONT BUMPER GRILLS 10.00/PR
    A/C HTR CONTROLS 20.00
    STEERING COLUMN W/KEY 20.00 (SURFACE RUST)
    GOOD PEDAL COVERS AND KICK PANEL 10.00/ALL
    PASS SIDE DOOR WINDOW FRAME 10.00
    HDR PANEL BUICK LETTER 10.00/SET
    L/R FENDER SIDE EMBLEMS 10.00/SET
    GRILL TRIM SURROUND 10.00
     
  10. dedsleds

    dedsleds KEEP ON TRUCKIN'

    sold:

    rear side panels
    rear sail panels
    most interior trim


    8.5 open rearend 100.00
    cracked up a/c dash pad 10.00
     
  11. dedsleds

    dedsleds KEEP ON TRUCKIN'

    sold

    rear end
    a/c controls/wiring/loom/vacuum door assembly
    fan shroud setup
     
  12. dedsleds

    dedsleds KEEP ON TRUCKIN'

    sold the header panel grill/trim/letters
     
  13. dedsleds

    dedsleds KEEP ON TRUCKIN'

    Sold engine/trans

    pending deal on the lower air dam pc

    ---------- Post added at 11:29 AM ---------- Previous post was at 11:23 AM ----------

    MISC A/C DUCTS AND HTR CORE HOUSING 25.00
    3 CORE RADIATOR 40.00
    TAIL PANEL W/LIGHTS/LOOM 40.00
    NICE DASH INSERT 120.00
    GOOD DOOR PANELS 135.00/PR
    SPEEDOMETER PLASTIC COVER. NICE 35.00
    HOOD HINGES 32.00/PR....LITTLE STIFF
    HOOD BOLTS/STOPPERS/LATCH/SPRING 10.00/ALL
    HEADER PANEL FILLER PANELS 20.00/PR (underhood)
    1 14x6 steel wheel 5 x 4 3/4 (need blasting) 10.00
    trunklid springs 10.00/pr
    OK DASH ASHTRAY INSERT 5.00
    SOFTRAY REAR WINDOW 20.00
    REAR WINDOW LOWER TRIM PCS (2) 15.00/BOTH

    SEAT BELT BUCKLES/LATCHES ONLY 45.00/LOT
    SPARE HOLDOWN W/NUT, RUSTY 5.00
    L/R FENDER INSERTS 15.00/ALL 6
    PASS SIDE DOOR WINDOW FRAME 5.00
    CRACKED A/C DASH PAD 5.00 (WORTH SAVING????)
    REAR SEAT LOWER FRAME AND FOAM 10.00
    OK STEERING COLUMN W/KEY 15.00
     
  14. dedsleds

    dedsleds KEEP ON TRUCKIN'

    sold lower core support air dam

    scrapped dash pad but saved dash emblem 5.00
    scrapped column but saved igniton lock/key/cover assembly 35.00 (non tilt)
    ok horn pad 5.00

    threw out rear seat foam
     
  15. dedsleds

    dedsleds KEEP ON TRUCKIN'

    Scrapped rear seat frame, hood parts, htr core box

    stuff listed below will be gone/scrapped in a few weeks....

    Misc dash a/c ducts 10.00/all
    ok hood hinges (stiff) 10.00/pr
    fedner inserts 5.00/all 6
    lower grills 5.00/pr
    3 core radiator 25.00 (scrap value)
    a/c condenser 17.00 (scrap value)
    horn pad 5.00

    parts left that i won't throw out

    gas pedal assembly w/matching brake pad/toe kick 20.00/all
    underhood cowl inserts 15.00/pr
    hood release assmebly 15.00
    steering column ignition color/key 25.00
    door panels 50.00/pr
    dash insert w/clear speed lens 75.00
    tail panel assembly 35.00


    http://chicago.craigslist.org/sox/pts/4295735946.html ..................................this is CL link for pics

    that's all left
     
  16. dedsleds

    dedsleds KEEP ON TRUCKIN'

    Sold the door panels
     
  17. dedsleds

    dedsleds KEEP ON TRUCKIN'

    sold

    hood hinges
    radiator inserts
    hood release
    tail panel parts
    fender emblems
    bumper grills
     
  18. dedsleds

    dedsleds KEEP ON TRUCKIN'

    Sold gas pedal assembly and brake pads


    misc a/c vent stuff underdash 10.00/all recycling soon
    horn pad 5.00 recycling soon
    dash emblem 5.00
    steering column ignition assembly collar w/key 20.00
    rear glass lower trim pcs 10.00/pr
    rear softray glass 20.00
     
  19. dedsleds

    dedsleds KEEP ON TRUCKIN'

    all I have left is the glass and lower trim for glass
     

Share This Page