1970 455 Stage 1 Engine and TH350 For Sale

Discussion in 'Parts for sale' started by stangs400, Apr 4, 2012.

  1. stangs400

    stangs400 Member

    I have a 1970 455 Stage 1 engine, rebuilt last winter. Im currently pulling it out of the car to replace with a LSX turbo conversion. Its mated with a built TH350 with a 2000 stall converter i believe. Was suppose to be built to handle 750hp. Shifts are firm and tight. Only 4000 miles on both engine and tranny. Never taken to the track or abused. Just street driven. All oils were changed at 500 miles then again at 2000 miles and once more this spring just to get refreshed for the summer. Here are the specs on the engine:
    Bored .030 over (462'')
    Cast pistons 10:5:1 comp
    10 on the crank i believe
    all new bearings
    Comp cam, cant remember the specs on it. It is a fairly mild cam though, with a little lope at idle.
    all new lifters and pushrods
    mild port and polish on 1970 Stage 1 heads
    oiling system mods
    block was dunked
    All new gaskets throughout
    new water pump
    new stage 1 fuel pump
    Edelbrock valve covers
    Edelbrock intake port matched
    Edelbrock 1407 750cfm manual choke carb
    TA Performance long tube headers
    Hei ignition with MSD module
    all new nuts and bolts
    Chrome 140amp alt
    The engine runs real strong, excellent oil pressure, runs cool and idles perfectly. I believe that is everything listed. I may have forgot a few things so dont hesitate to ask any questions. I can seperate the engine and transmission also. The Transmission cost me around 1300.00 plus converter. If I could get 1k for the TH350 I would be happy. Im not sure exactly what these engines go for, but I have well over 6k invested.
    Engine and Transmission are located in Omaha, NE
    Asking $4800.00 For Engine and $1000.00 for the Transmission.
    Also willing to ship if need be.

    stage 1 (1).jpg stage 1 (2).jpg stage 1 (3).jpg
     
  2. russ455

    russ455 No longer a bubbletop

    where are you located?
     
  3. BK455-

    BK455- Rest In Peace

    Location ???
     
  4. Ryans-GSX

    Ryans-GSX Have fun, life is short.

    Per board rules you must put a asking price.

    PS welcome to the V8Buick Board
     
  5. stangs400

    stangs400 Member

    Forgot to add those, sorry guys! Edited!

    Located in Omaha, NE.
     
  6. MikeM

    MikeM Mississippi Buicks

    It's a longshot I'd be interested but what are the engine codes and serial number on the engine?

    Reason I ask is you say it's a stage 1 engine but don't mention any of that. If it's the missing block out of my stage 1 car I'll pay you a gazillion dollars.

    Mike
     
  7. stangs400

    stangs400 Member

    I know the block code is 1231738 View attachment 224519
     
    Last edited: Apr 8, 2012
  8. stangs400

    stangs400 Member

    For some reason the picture isnt showing up so here:
    IMG_0018.jpg
     
  9. stangs400

    stangs400 Member

    Taking offers.
     
  10. 72STAGE1

    72STAGE1 STAGE 1 & 2

  11. David G

    David G de-modded....

    TH350 is interesting, but it sounds like it's built for the strip, if you're talking it's built for 750hp. I'm looking for a built TH350 to run behind a mild street-only 455.
     
  12. stangs400

    stangs400 Member

    Its actually a fairly streetable transmission. I actually only drive the car in town and barely take it above 65 mph. More or less just cruise in the car. The guy said it would handle 750hp, but it drives like its build for about 550hp range.
     
  13. David G

    David G de-modded....

    Looks like I'm having a trans built instead, but thanks for the info.
     

Share This Page