1967 buick special

Discussion in 'Parts wanted' started by David A., Jul 10, 2006.

  1. David A.

    David A. David A

    I have a 67 Buick Special complete with 300 V8 2bbl. This is an air conditioned, power-steering car. Anyone need anything, let me know. I will take pictures! The car is too rusty to restore and the interior is shot. And I also have a clear GA title.

    -Thanks, David
     
  2. MIKE Z buicks

    MIKE Z buicks Well-Known Member

    Is the grill OK? If it is how much for it? Thanks.
     
  3. tjcole

    tjcole 60's Buick nut

    Hello David,

    I would be interested in the following depending on condition:

    1. Antenna bezel and the black rubber thingy that holds in in place as well as the antenna itself.
    2. Seatbelts
    3. Grill if Mike passes
    4. Headlight bezels
    5. Tail lights
    6. Tail light wiring harness
    7. Drivers side fender
    8. Steering wheel (depending on color and condition)
    9. The stainless Steel molding that surrounds the front and rear windows.
    10. The throttle linkage including the switch-pitch swith (with wiring).

    I'm sure I have more and will post when I remember them.
    If you can pictures would be great!
    You can get ahold of me at work via my phone or email:
    360.396.8421 or todd.cole.ctr@swfpac.navy.mil
    Thank you for your time,

    Cheers,
     
  4. 12lives

    12lives Control the controllable, let the rest go

    email sent - thanks!

    edit - I also need the passenger side front wheel opening trim.

    - Bill
     
    Last edited: Jul 12, 2006
  5. calvin dubose

    calvin dubose Calvin D.

  6. ragtops

    ragtops Gold Level Contributor

    I need a horn relay. Must be in good working condition, of course, when it reaches me.
    Thanks,
    Mike
    dadphelps@yahoo.com
     
  7. David A.

    David A. David A

    67 spl.

    Ok guys, I am going to pull the car out so i can get to everything and will take pictures of what you guys are looking for. I will answer all questions and quote prices as soon as I can, so please bare with me and we will try to get everything everybody needs if its good. Thanks david.
     
  8. wheelz

    wheelz 'B' is for Buick.

    a/c vacuum actuator

    Hello David. .I need a factory a/c actuator ON the firewall side, located on the fan box, sorta facing the engine, about 6 inches round, and its vacuum actuated so it will have a few small hoses attached. If you would be so kind to send me pix, I MAY be interested in the entire a/c fan box assembly! :TU: ThanX! Wheelz, Tampa Bay
     
  9. tjcole

    tjcole 60's Buick nut

    What is that whirling sound? oh I know, it's David opening a big ol can of worms.... little did you know the response you'd get eh? :grin:


    Cheers,
     
  10. David A.

    David A. David A

    pictures!!

    HERE'S SOME PICS OF THE GRILL....
    [​IMG]
    [​IMG]

    HERE'S A PIC OF THE ANTENNA...
    <IMG SRC="http://pic19.picturetrail.com/VOL1072/5451958/11432326/168139252.jpg" border="0" alt="Image Hosting by PictureTrail.com">

    HERE'S A PIC OF THE LEFT HEADLIGHT BEZEL...THE RIGHT ONE IS BUSTED
    [​IMG]


    LEFT AND RIGHT TAIL LIGHT...THE BEZELS ARE PIMPLED BUT THE LENSES ARE GREAT. THE HARNESS IS OK :TU:
    [​IMG]
    [​IMG]
     
    Last edited: Jul 17, 2006
  11. carbineone

    carbineone Well-Known Member

    Looks Like Tjcole may want it all, lol, but if he passes on the antenna and its not more than I can afford put me in line second for the antenna......Thanks
     
  12. calvin dubose

    calvin dubose Calvin D.

    drivers side trim

    I'll take that drivers side trim......... .whats the ticket?????
     
  13. tjcole

    tjcole 60's Buick nut

    Looks like I'll have to pass on the headlight bezels, they are skylark. Looks like someone swapped your special grill/bezels for skylark ones.
    But I am definately interested in the tail-light lenses buy the chrome surrounds look a bit rusted. The wheel-well trim looks like something I'd would love to see pics of (all four wheels please). I will definately take the antenna, holding nut and chrome bezel please. I'll wait for your pics of the wheel well trim and then we can talk price for the lot.
    Thank you,

    Cheers,
     
    Last edited: Jul 17, 2006
  14. ragtops

    ragtops Gold Level Contributor

    Antenna

    I would like to be in line for the antenna parts left over. I need a mast, mine is broken and has been stuck back together. Awful. And, still, a horn relay.
    Mike Phelps
    dadphelps@yahoo.com
     
  15. Sportwagon400

    Sportwagon400 Well-Known Member

    I am interested in the rear wheel trim for both sides can you either post pictures or email them to me a kkklassen@shaw.ca

    Thanks

    :TU: Ken
     
  16. tjcole

    tjcole 60's Buick nut

    email me the pictures please as well, especially of the wheel well trim and all the other stuff I mentioned in my previous post.

    Thank you!
    todd.cole.ctr@swfpac.navy.mil
     
  17. calvin dubose

    calvin dubose Calvin D.

    next in line

    I want to be next in line for the wheel molding trim
     
  18. 12lives

    12lives Control the controllable, let the rest go

    If you are emailing pics send me the pass side front trim mentioned above. Waiting to hear on the other parts as well.

    - Bill
     
  19. David A.

    David A. David A

  20. David A.

    David A. David A

    More pics

    THE WINDSHIELD MOLDING
    [​IMG]

    THE REAR MOLDING
    [​IMG]

    ITS A LITTLE SCRATCHED
    [​IMG]

    ...AND THE HORN RELAY
    [​IMG]
     

Share This Page