1964 Buick 300 motor and trans complete

Discussion in 'Parts for sale' started by cbcjcgreinke, Oct 30, 2009.

  1. cbcjcgreinke

    cbcjcgreinke Dam, this economy sucks!

    I haven't driven it this year but it gets started every month.
    1964 300 cid engine 2 bbl carb and auto trans. Pointless convertion, 92k on odometer.
    Complete from fan to tail shaft. Ran good last time it was on the street.
    400 obo?
    219-663-8066 Chuck
    Still in the car come take a listen.

    SOLD
     
    Last edited: Jan 22, 2010
  2. Joe65SkylarkGS

    Joe65SkylarkGS 462 ina 65 Lark / GN

    Steel or aluminum heads and intake?
     
  3. cbcjcgreinke

    cbcjcgreinke Dam, this economy sucks!

  4. 1967GS340

    1967GS340 Well-Known Member

    Aren't the 64 300's all aluminum heads and intake?
     
  5. cbcjcgreinke

    cbcjcgreinke Dam, this economy sucks!

    Yep, they are.
     
  6. cbcjcgreinke

    cbcjcgreinke Dam, this economy sucks!

    No one needs or can use a 300? You get everything fan to tailshaft minus alternator.
     
  7. Joe65SkylarkGS

    Joe65SkylarkGS 462 ina 65 Lark / GN

    If you were closer I'd take it just to have it in stock!!

    Would you sell me the heads and intake? Those parts can be shipped easy.
     
  8. cbcjcgreinke

    cbcjcgreinke Dam, this economy sucks!

    buy the whole thing and I'll shipp the heads and intake to you.:TU:
     
  9. cbcjcgreinke

    cbcjcgreinke Dam, this economy sucks!

    Final bump.
     
  10. cbcjcgreinke

    cbcjcgreinke Dam, this economy sucks!

    Must be a kickit to the curb item.:Dou:
     
  11. 1967GS340

    1967GS340 Well-Known Member

    Have you put it on Craigslist? I have seen quite a bit of interest in the same motor there.
    I wouldn't scrap it. Hold on to it and re list it every month or two and someone will snatch it up and be happy to do it.
     
  12. cbcjcgreinke

    cbcjcgreinke Dam, this economy sucks!

    ah, out to the garbage man.:beer
     
  13. Sleekcrafter

    Sleekcrafter Well-Known Member

    I would be interested but the shipping would kill me. I too would be willing to take the heads, and shipping wouldn't kill me.
     
  14. Rufus

    Rufus Well-Known Member

    I've got a '65 Cast Iron 300 2 barrel a lot closer to BC I'd like to get rid of ($100). I'm just south of Seattle. PM me if you're interested.

    Rufus
     
  15. wheelz

    wheelz 'B' is for Buick.

    WAIT CHUCK! PLEASE remove the 2v carb and the air cleaner and I'll take them off your hands!!! Wheelz, Tampa Bay
     
  16. 197064buickspec

    197064buickspec 1964 Special Post-455

    Chuck,

    Too bad I don't really need another motor. But your pretty close to me(1.5 hrs) almost tempting. The other part I have no way to get it here anyway. If it doesn't sell by spring I may take it off your hands. I would suggest not scrapping it.

    Brian
     
  17. cbcjcgreinke

    cbcjcgreinke Dam, this economy sucks!

    Lol, started this post on Nov 3, 09 and no one spoke up till now.
    Promissed the the scrap guy he could have it next week. He said the aluminum would be worth alot with the valves and hardware removed.:Dou:
     
  18. wheelz

    wheelz 'B' is for Buick.

    Ohh well. :Dou: Aint dat da whay is always goes??? Our loss...unless of course you still have the carb and air cleaner???? :Do No: Wheelz, Tampa Bay
     
  19. Sleekcrafter

    Sleekcrafter Well-Known Member

    Please don't do that..... .$.65 (cents) a pound Wheelz and I will do that!!!
     
  20. WV-MADMAN

    WV-MADMAN Well-Known Member

    Why not drop the price:(

    $50 to $75 in scrap rather than give someone that can use it a deal :Dou:
     

Share This Page