I'll be swapping a 69-72 12 bolt into my 68 Skylark fairly soon. The rear has no brake hardware or lines on it, so I was wondering what I'll need in the brake line department. I was looking at getting my stuff from InlineTube. I found the 68-72 Stainless lines, the T mounting clip: http://www.inlinetube.com/Brake Hoses rubber/GMHB14.htm and the rubber hose to run off of it. I can't, however, find the correct T fitting for the lines to run into that bolts to the mounting clip. Any suggestions? Also, will the rubber line work with my current brake lines between this new setup and what's already on the car? Thanks, Jon S.
There is a bracket that bolts to the rear end that holds the tee (should be like what you already have). I just took the drums off my 68-72 12 bolt and changed to disk. I had to change from the tee out. Let me know if you might want what I took off. Insead of cutting the factory lines, I made new ones.
