I just bought a nice 60 LeSabre. The previous owner had the torque ball seal replaced about 4 years ago. Within the last year the torque tube...
i am a proud owner of 1956 and 1957 roadmasters. i have changed several dynaflow rear oil seals over the years but they never lasted long. i...
Does any one know the thread size on the trans oil cooling lines? Dynaflow -61
Hey all! 61 Lesabre 364 Nail Head and a Dynaflow. "Kick down" linkage or technically the "stator pitch lever" that connects to the throttle...
Looking for advice. I have a 1966 Buick riviera with a 401 matched to a dynaflow out of a 1963 Riviera. Never came with a driveshaft. I'm not...
Howdy all! I'm kitty and I'm new around here, hoping to learn about Buick's and get some help getting my new love back on the road. My husband...
Looking for the parts below for my Dynaflow trans: 1. Inner Range Selector Lever 2. Parking Lock Actuator 3. Outer Lever and Shaft 4. Range...
Hello I am a long time Tri-5 Chevy guy and I had been looking at Buick's for years and always wanted to build a old 55 Buick. I found this 1955...
So I found a 3D print firm that will make the plastic parts I need for my 63 Dynaflow. Anyone know the dimensions of the speedometer driven gear...
I have a engine and trans from a 1953 Buick Super V8. The engine has a hole in the piston. The previous owner removed the intake and head but...
SOLD all items 5/8/14 Good luck with your project Wayne...send me video and pictures once you get it running!
Greetings from a new member, I have a 55 Special, rebuilding dynaflow, need some info. I have read somewhere but cant find in my Buick books: what...
I have a 401 Nailhead + Dynaflow from a 1961 Buick Invicta, still between the frame rails. Intended on getting it running for a future project,...
