Read your reply to rob on setting up his oil pump. Im doing the same thing,my question is? checked my clearance got btween 3-4thousands { tight 4 thou. loose 3 thou.}decided to use 5 thou shim. do I also use the gasket plus the shim since the gasket is about 6 thou thick???
The shim kit is nothing more than an assortment of gaskets of varying thicknesses. If you measured .003-.004, using a gasket that measured .006 should give you optimal end clearance. You may not have needed the shim kit, but it's good to have.
18 cars, a great night, and it got quite chilly. Jason took the ferry, and drove up Rt 7 to Danbury. Followed me home though, 84 to 684 to Hutch, to 95 to Throgsneck Br.
Yes, and a very nice one. LIE to Exit 41 (Rt. 106/107 ), north on 106 to West Main Street, barricades on left. Street is closed by the local Chamber of Commerce until mid October. 5:00PM - ?. This thread is from last Tuesday: http://www.v8buick.com/showthread.php?t=82766&highlight=Oyster+bay