Wiring fan,fuel pump, etc

Discussion in 'Sparky's corner' started by Whitedrifter, Jan 27, 2011.

  1. Whitedrifter

    Whitedrifter Well-Known Member

    hello everyone
    I have to connect my electric fan,fuel pump,radio and line lock
    I wondering if anybody have a wiring diagram or a solution to make it simple(like all in a same box or something):TU: thanks
     
  2. carmantx

    carmantx Never Surrender

    Are you talking about switches, or the entire wiring for all.

    You will need a relay for the electric fan and fuel pump.
     
  3. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Use Relays.
     

    Attached Files:

  4. Whitedrifter

    Whitedrifter Well-Known Member

    I know
    like one for fuel pump one for the fan and one for the 12v switch
     
  5. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member


    You need two relays. Fuel Pump and Fan need separate relays. The line lock does not.
     
  6. carmantx

    carmantx Never Surrender

    But make sure you run the line lock through a fused line.

    You want to have your relays as close to the power source as possible.

    Is your battery under the hood? Or in the trunk?

    Where do you plan to put your switches?

    Some of this information could help us help you with wiring.
     
  7. Whitedrifter

    Whitedrifter Well-Known Member

    my battery is in the trunk and the switch is in the car
     
  8. carmantx

    carmantx Never Surrender

    Ok, you got it all figured out now?
     
  9. Ken Warner

    Ken Warner Stand-up Philosopher

    I believe painless sells a nice little block with 1 or 2 relays and several fused circuits that will do what you want to do and keep it looking clean.

    regards
     
  10. Whitedrifter

    Whitedrifter Well-Known Member

    thanks i will look for this
     

Share This Page