Wilwood front disc brake Conversion

hey guys,

I have a chance to buy a used set of Wilwood front disc brakes and replace my front drum brakes. Wasn’t on my radar, but i can get them for around $400.

Rookie question time....

Do i need new spindles, master cylinder, proportioning valve too?

https://www.summitracing.com/parts/wil-140-10996/applications/make/buick/year/1968

 

I believe if the kit is still complete will wood makes it to fit with disc or drum setup.........might need a different spacer and bolt if parts are missing. Try to find if the car it came from had disc or drum spindles

 

http://www.wilwood.com/BrakeKits/BrakeKitsProdFront.aspx?itemno=140-10996

Shows a parts brake down

 

May have to drill and tap the spindle upper anchor bolt hole to 5/8"-18 if it's only 9/16" now.

Larry

 

Thanks guys! Would i need a different master cylinder and proportioning valve?

 

Also, I have 14”Buick rims on the front. I’m wondering if these could work with the 14s?

 

Looks like it can fit 14s according to the Wilwood website.

 

They are coming off drum spindles on a chevelle. I assume the chevelle and GS would be the same?

 

You would need different master and p valve