Any ideas on late model wheels that would fit a 66 Chevelle or 67 Skylark? Any pix? I would prefer 5 spokes. Thanks
camaro, firebird, gto, g8, new caprice ppv ,ss, corvettes, and s10/s15 trucks all have the same bolt pattern. offset may not be the same and you may need a spacer may not. also bmws use the small gm bolt pattern. ---------- Post added at 02:12 PM ---------- Previous post was at 02:08 PM ---------- what size wheel are you wanting 15 16 17?
There the same size just measured metric look in the pt section you can see example of bmw wheels on a skylark.
something from rocket racing or cragar would fit the bill id image. bad thing about oem wheels most need spacers on the back due to the offeset and you end up spending about the same. theres examples of the only 2 5 spokes i know of offeren in 17 that was oem gms zr1 or z06 vettes
I think a 5 spoke wheel looks the best when the lug nut holes are integrated into the spoke near the center instead of between the spokes. I'll try to find some examples.
thats what will go on my 66 they kinda look like the oem wheels but different if that makes sense cragar 500 series ---------- Post added at 11:56 AM ---------- Previous post was at 11:55 AM ---------- the 610 is the old school cragar look
seen similar on a first gen fbody. not my fav. ---------- Post added at 07:28 AM ---------- Previous post was at 07:12 AM ---------- zr1 wheels but there close to what you want. not a fan of them on a buick. rather have something with a deeper dish offset.
Here's a couple more examples that are recessed a little. It would be a 5 lug rim of course. Might go with a smoke grey color too.