Have a 65 Skylark with a Chevy 454. Stock steering box and Chevy setup for power steering pump. I need a hi-pressure line that has both ends the same. The screw in end to the box and the pump is a screw in end too. Everyone that I seem to grab has the correct end for the box but the pump turns out to be a screw over (female) when I need it to be a screw in (male) same as the other side. Have been looking for some time. Any help? What have others used that converted the motor to a Chevy?
Have you tried borgeson,,they have a power steering line kit that I think "might" be what your looking for!!
Here's the Borgeson listing: http://www.borgeson.com/xcart/catalog/Power_Steering_Hose_Kits-orderby_0-p-1-c-85.html Or you can go to your local NAPA, I think they have kits also and I think they have some premade ones listed to for swaps. Or try your local Hydraulic hose store and they can make one for you. I have McGill locally http://www.mcgillhose.com/ Or you can try this link to find a store near you: http://www.thomasnet.com/nsearch.ht...1281347733221342Z3a125Z3a2Z3aZ3aZ3aZ2d1Z3aZ3a Good Luck :TU: