Water Pump Rebuilders, Who is Good

Discussion in 'The Bench' started by wagonboss, Jun 1, 2005.

  1. wagonboss

    wagonboss Benny Georgeson was 1st

    I'd like to keep the factory original water pump in my '70 Stage One because I think most every part on the car is factory original. Does anyone know of a good water pump rebuilder where I can send my original pump, get it rebuilt and have it sent back to me?

    Thanks,

    Dan
     
  2. 69GS400s

    69GS400s ...my own amusement ride!

    Im working on it for you....
     
  3. henry white

    henry white Well-Known Member

    this will be interesting because i also have the original from my 70 stage 1.
     
  4. Dan Healey

    Dan Healey Well-Known Member

    I knew I'd be asking this sometime....

    Might as well be now. How do you tell if it is the correct year casting number, and how do they brake down the date codes on them(same as the block, heads, etc)? I think I have 3 pumps to check. :confused:
     
  5. telriv

    telriv Founders Club Member

    I have used The Flying Dutchman for years. Keep my fingers crossed, no bad ones yet. He's advertises in Hemmings. He's in Oregon.
    Tom T.
     
  6. 87GN_70GS

    87GN_70GS Well-Known Member

    Make sure you retain the cast impeller, and that a stamped impeller is not used.
     
  7. wagonboss

    wagonboss Benny Georgeson was 1st

    Thanks, all. Tom, I looked in Hemmings and the only Portland Oregon vendor for water pump rebuilds that I could find is called Automotive Friction (800-545-9088). Is this the place you have dealt with (Flying Dutchman)?

    Thanks,

    Dan
     
  8. telriv

    telriv Founders Club Member

    Just in case this question came up I brought home a Hemmings from work. The address is: The Flying Dutchman
    200 Davis Creek Rd.
    Selma, OR. 97538
    Phone # 541-597-4057
    Just tell him what you want, what you would like to do or use. He has the ability to manufacture parts that are no lnger available if that may be the case. He may not be the least expensive but I've found his work to be above par to most. He's a nice guy & the turn-a-round is reasonably quick. I'm sure you'll be satisfied.

    Tom T.
     

Share This Page