Water Manifold O-Ring

Anybody have a source for the water manifold o-ring? I tried to locate one locally with no luck. I even went searching with a cross referenced o-ring part number(#313), but nobody has one in stock. Any thoughts? Thanks guys!

 

Carmen Faso has got them....716-693-4090

 

I use 2 and stacke them, no leaks.

 

ta performance has them with the 2 side paper gaskets $3.00 ta-1701-401a part number. i think they come in a timing cover gasket set too at your local parts store.

 

Andy-I can give you one. I just slobber them up with sillycone-Dan

 

I have plenty of them as well. And ditto on what Ted said.

 

O-ring pn is Fel-Pro #10672 or Victor # C45257. If it's not avail, look for a #2-313 o-ring from a hardware or plumbing supply store. It's 3/16" dia, and 0.662" ID.

It's just a standard o-ring, not a custom-made-fits-only-old-buicks-specialty part!:grin:

I'm fortunate to have an o-ring store nearby! Here are o-ring sizing charts:
http://www.sealingspecialties.com/sizingchart.htm

 

Thanks for the info Walt! In my searching yesterday it appears as if the Fel Pro part is no longer available, or at least nobody I spoke with had a listing for it. Nobody had a #313 o-ring either.

Luckily for me, Dan & his buddy Tim saved the day. Thanks guys! :beer

 

http://www.rtdygert.com/