Looking for a fan shroud for a 68 Buick Electra 430 4bbl. Please contact us if you have any or hear of any. Thanks! kc
HI The measurements from our radiator are 29 1/2" x 18" What size is the one from your Riv? Thanks kc
Hello KC and Steve Check out this link and if I can help at all just holler :TU: http://www.v8buick.com/showthread.php?s=&threadid=47586 Cheers
Hi All, In addition to the fan shroud, I am looking for a 5 or 6 blade fan that will fit the shroud. If anyone hears or knows of any, PLEASE email ! Thanks for all the help!
The disadvantage of being selfemployed... With the nice weather comes work.... Just got home and beat. I have the fan/clutch assembly your looking for, just to dark out and I'm way too tired to go back out. I promise I will measure the shroud and check on the fan assembly first thing in the morning. I'm parting out the Riv due to a rusted out frame. Please be patient. Kelly.
took pictures Got my tired butt out of bed and took a look. The shroud has a small chunk out of it but is 29 1/2 X 18 Dont know if you were looking for something perfect or not. The fan is a 5 blade.
Kelly, It's hard for me to tell where the chunk is out of it. Is it at the top? What size is the engine in your riv? Honestly I don't know what question to ask to know if the fan blade will fit our 430. How much on the shroud and fan? By the way--thanks for all your help and time on this. kc
My riv is a 430 and the chunk is shown clearly in the middle of the second picture. $50 plus what ever shipping is. Kelly
I have a shroud from a 1968 Electra . I removed from the car and the complete grille. The shroud is 27 1/2 " wide and the circular blade opening is 22 3/4". it has a 3/4" hole on the left side about 5-6 " down from top, otherwis is perfect. according to parts book should fit 1967 & 68 6000 - 8000 w/ac, and 69-70 Riviera. Attached picture. Jim Schilf palbuick@al.com