Various 70 GS parts needed

Discussion in 'Parts wanted' started by Smartin, Mar 1, 2023.

  1. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Looking for the following to finish up this brown Stage1...

    - Radiator top plate FOUND
    - Good used cowl screen FOUND
    - Good AC condenser
    - Neutral safety/reverse switch for floor shifter FOUND
    - Front seat belt retractors in brown with small male buckles
    - AC compressor brackets that hold compressor to lower bracket FOUND
    - Bolt for rear compressor lines FOUND
    - Alternator adjustment bracketFOUND

    I'm sure there will be more...I'll update this post with needs as time goes on. Trying to get this done for BG.
     
    Last edited: Mar 11, 2023
  2. oldschool85

    oldschool85 Well-Known Member

    I have the used cowl screen and a condensor( unknown condition)
     
  3. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Can you check the connection points and give it a once-over for me? I have a condenser here but one of the fittings is trashed.
     
  4. George D.

    George D. Platinum Level Contributor

    I suppose I should look in "his" boxes he has here....
     
  5. Matt Knutson

    Matt Knutson Well-Known Member

    Neutral Safety Switch for '70 console mount is Standard Motor Parts NS-7
     
  6. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    George, yes please.

    Thank you, Matt.
     
  7. Stage 2 iron

    Stage 2 iron Platinum Level Contributor

    Adam, you may want to add a date code time frame for the radiator cover.
     
  8. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Car was late 70 build
     
  9. Dano

    Dano Platinum Level Contributor

    How late? The switchover to 2-hole radiator top plate seems to have happened in mid-May.
     
  10. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    May LOL ...I'll go grab the cowl build date.
     
    Dano likes this.
  11. Dano

    Dano Platinum Level Contributor

    Of course we know some of these changeovers weren't definitive. There's a thread on here where Gary (@BUQUICK) notes 2 seemingly orig. May bodied cars that had 1-hole & 2-hole which IIRC made me conclude my 05B (Flint) car should have a 2-hole but now I'm questioning that as just looked myself at my car & I thought it was 05C (my '71 is 05C & I can never seem to recall which is which).
     
  12. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    05B is the cowl tag date
     
  13. Dano

    Dano Platinum Level Contributor

    I searched & can't find Gary's post I was referring to. I don't think anyone could find fault with either part on a 05B bodied car.
     
  14. Stage 2 iron

    Stage 2 iron Platinum Level Contributor

    I believe the date codes on the radiator support and radiator cover go by weeks.
     
  15. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Updated the list. Looking for AC compressor brackets that bolt to the compressor itself so it can hinge on the lower bracket. Front and back sides.
     
  16. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Also looking for the bolt that holds the two hoses onto the back of the compressor.
     

    Attached Files:

  17. oldschool85

    oldschool85 Well-Known Member

    I got them
     
    Smartin likes this.
  18. hwprouty

    hwprouty Platinum Level Contributor

    IMG_1849[1].JPG IMG_1850[1].JPG IMG_1851[1].JPG IMG_1852[1].JPG IMG_1849[1].JPG IMG_1850[1].JPG IMG_1851[1].JPG IMG_1852[1].JPG


    Is any of this what your looking for Adam??
     
  19. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Yes, everything except the sheet metal piece.
     
  20. hwprouty

    hwprouty Platinum Level Contributor

    OK. You want both sets?
    What's your address?
     

Share This Page