upper sway bar bushing

Hey guys I haven't posted for awhile. I'm having problems locating rubber upper sway bar bushing for my stock GS 455. Any suggestions or part numbers would be helpful having no luck with local suppliers.o No:

 

Moog number is K5241. NAPA number is 265-1927.

 

Thanks Bill for the part numbers, I tried the moog k5241 they didn't seem to fit right, maybe they were boxed wrong. I'll try another set. My swaybar is 15/16. I'll keep in touch.:TU:

 

Shouldn't a GS have a 1" bar on it? I pilfered a front bar off a `70 GS350 car for my `65 and it's a 1" bar. All the swap bar bushings are quite tall, probably 1/4" or so taller than the brackets so they tighten down real snug. It doesn't seem right when you go to install them but that's they way they are designed. Perhaps the ones you have already are correct.

 

i just took out my 7/8 bar and put in a 15/16 bar it was from a 74 camaro you might try that listing

 

thanks Bill. my sway bar is a 1 inch, I checked tonight. You were right, the moog bushing don't look like they fit. Making sure befor I install them. Thanks Guys! Oh by the way my name is Craig.