Can you guess wht brand haha.. but ah. I ment to say I thought You had a pair of small oil feed lines going to the front of the oil pan. The picture Sean posted of your engine shows a pair of massive feedlines going to side of pan...just curious to if you switched up the feedlines/pan at some point.
I agree, Mark is always giving me a hard time for the HP numbers I expect from my twin turbo engine. Mark has never made any claims that the kit would produce a certain HP as there are WAY to many variables to predict the results.
Yeah only hp number mark gave me was what the turbos can support hell according to the dyno vid i posted it made more then the typical 7psi = half more ontop what you started with...and that was with 6psi...alot of guys run 8psi i'll be running 10psi to start with stock bottom
Yeungling??? Yeah.. I've always had the huge drain lines 3/4" ID with 4AN feed lines.. I have two 3/4" barbed fittings welded into the pan with hydraulic oil return lines and custom made turbo drain fittings.. It's more than you need..