torque spec for rear sway bar

anyone know what it should be? I ordered shim kit with sway bar fr OPGI...looked like it was in there pretty snug. Any advise? Weight on or off when torquing. I changed up my frt one as well 1.25 in, it's a monster compared to what was in there.

 

ttt

anyone?

 

mike:
will check it out at home tonight & let u know .

 

Mike - What size is your front one? If I remember correctly the rear should be smaller than the front or you will have trouble with handling at the limit.

- Bill

 

Thanks guys.I have 1 1/4 front and 1 inch in rear...checked past threads, should be fine.

 

Good- I guess I read your first thread wrong! :sleep:

- Bill

 

Torque fasteners 45-55 ft lb for the rear bar. Doesn't matter if it is loaded or unloaded. Front bar torque end links 15 ft lb and support brackets 30 ft lb with full vehicle weight on bar. Also, the slit in the support bushing for the front bar face forward.

Steve Kersh