Hi Guys,Need some help. Can anyone help me out.Trying to put a 71 tilt column into a 70GS.First problem was the ignition switch.Had to turn wiring harness 180* to install. Works OK. Next problem,had to use directional signal from 70 because 71 would not plug into existing harness. Same contacts, different plastic housing. This was also 180*reversed. Next problem,Purchased column w/o cancel cam &everthing above it. Will not work using 70 non-tilt parts. Can anyone help me out? Need exploded view of tilt column &which cancel cam to use. Also,if spring, locking plate &other pieces are same or different. Thanks up front. JOE :grin: :grin: