A near new stainless intake valve set from TA. Looks to be around 2.225. Out of TA Track eliminator heads. Installed titanium valves instead. Included are retainers and springs for solid roller cam. Sell for $75
Inline pending a more accurate measurement of valves head and stem sizes. TA Stage 1&2 T/E heads come standard with 2.130 intakes with 3/8 stem. Options are for 2.260 with 3/8 or 11/32 stem. Thanks
Have them in Az. They are out of TA Track Elim heads. Sure they are the 2.260 valve 3/8 stem. I will look up the custom order for the titanium ones, they are the replacement ones so same size.
My TE2 heads are 2.260 with 11/32 stems. So if so I'm for sure interested if not they would t do me no good and I'm out
The set that was custom ordered were 11/32 stem size. I will be going out after Halloween, most likely Friday. Let me know if your wanting them, jim 9513752665
The set that was custom ordered were 11/32 stem size. I will be going out after Halloween, most likely Friday. Let me know if your wanting them, jim 9513752665
11/32 stem o.k. by me, it's the valve size 2.260 for Ben. I'll jump at em if 2.130. Looks like you have a sale either way.
Yes if they are 2.260 I'm in, glad we dont need the same part 65larkin. And I was going to ask if you need these for your huokd to get going I would you have at them. They will just be spared for me on the just in case
I'm after valves to go into a pair of iron heads. The ones I have have 1/2OD guides in them already so knocking them out for 11/32 ID replacements is no biggie for me as I have the gear and experience - minimising outsourcing always good .
He said 1/2" od. I think he is referring to replacing the guide completely, install a new guide with smaller inside, then trimming thr guide down to get proper clearance
Ben you are correct my freind, these heads have been rebuilt previously and .502' OD thinwall guides fitted which are 3/8 ID. Swapping these out for 11/32 ID replacements I can do without sending them out . Apologies for sidetrack on thread but it's back on top.
Smartphone. heads If you need these to get your motor up and rolling I will step back. For me they will just be spare parts to hopefully not need to ever use. I like having spare parts on hand for the just in case. Plus it seems like if I have a spare part, that part never fails
I will measure when I go out to Az, probably 11-6, but the replacement valves were 11/32 stems and 2.260. Send you a PM, jim