Used TA 413 just took out of car. Put in a new Scott Brown custom. Cam was working fine when I pulled it out. I switched to new cam because I needed a blower profile. Also throw in the Rhoades v-max lifters. You do need an adjustable valvetrane to use the lifters. They are all marked as how they came out of my motor. $65 plus shipping from Linden MI
About 6000 miles on the cam. I use an accumulator so always start motor with oil pressure. Finishline did the rebuild on my motor last fall and inspected the cam when they put it in. Noise? The lifters make more noise than my new solid lifter cam. Actually the solid cam makes no noise. So smooth it is hard to believe. You do have to play with these lifters a bit. They are designed to be adjusted like a solid lifter cam. To be honest I think the lifters are a bit noisey. But could not hear them over the ProCharger.:laugh: