Stage 2 Track eliminator heads complete ported by Tri Sheild.

Thanks these are sold

I have a set of Stage 2 track eliminator heads. looking to see if anyone is interested. These are assembled and ported by Tri Shield Performance never pulled out of the box. I have since went in a different direction. Set up for hydraulic roller cam. These have 1.81 exhaust valves.
Asking 3000.00
I have flow numbers and will post tomorrow if I have any interest.
Located in Michigan

 

Sorry I am located in Michigan.

 

Good price these wont last long.....are you sure on the exhaust valve size.....I know intake valve can be gotten bigger 2.250. But never heard of exhaust valve that big in stage 2 heads

 

I will check but I am all but sure that the exhaust was larger than stock. I have the sheet from tri shield that I will be posting tomorrow.

 

Not saying it cant be done.......but on 2s intakes are normally 2.125 or 2.26 with exhaust 1.755......I know stage 3 and 4 can have larger exhaust

 

Interested pending flow numbers

 

Interested. What are both valve sizes,3/8 stem? Flow numbers? Shipping to 54313

 

Inline

 

once I get home from work (I guess I am essential) I will get the flow numbers

 

I have attached picture of the box shipped in, heads still wrapped in original unopened condition, invoice and flow numbers.
These were machined, ported and assembled with 11/32 valves 2.19 intake and 1.81 exhaust. This was done with a 470CI combo in mind to produce 600 torque 600 HP. Springs for hydraulic roller cam. I have since went LS and just have no need. I have had these for over 7 years and they need to go to someone that will put them to good use.





You will see that these are assembled with 2.19 intake and 1.81 exhaust.

 

On your invoice the I take say 2.260 but on the flow sheet it say 2.190.

I know how close my 2.260 and 1.755 are to touching.....these have be just a few out kissing each other.

Will make someone an awsone set of heads at a great price

 

you are correct. I just update my last post. they are 2.19. I forgot after 7 years that they were turned down.

 

K. Now it adds up to how the 1.810 valve fits..........great price on great heads

 

So 326 on the intake at .600. I'm out of line. Was looking for more.

 

I have the numbers posted. please let me know if you are in.

 

Sent you a pm

 

Your up

 

I am going to pass. Thank you.

 

TTT