Hi any 67 a body bucket will fit you will need to buy an adaptor so you can bolt both side of the seat down though if its a hardtop any a body rear seat from any other hard top should fit Good luck Gerry
any a-body buckets (67 & later) will fit but u will need the mounting rails. as for the rear seat, u will have to measure the width of the seat & the seatback to compare to other a-bodies' sizes.
The GM A bodies are the Olds Cutless, 442, Pontiac Lemans, GTO, Chevy Chevelle, Malibu and the Buick Skylark and GS's. What ever seats/rail system is used you will need the proper brackets thats should be welded to the floor for the railing used. These are avail. after market. Many Chevelle places sell these brackets for the bench to bucket conversion. Even if you do find org. 67GS buckets you will need 4 brackets (2 for each seat toward the hump). I would not just bolt them to the floor sheet metal. The factory used welded in brackets for a bucket car. Ray
Not to high jack this thread, but I have a 63 wildcat that is in bad need of bucket seats. Are the 63 impala's the same as buick? or what other model. It tough finding interior for a 63 wildcat. Thanks adam
What you need is what I'm getting rid of...very unusual...a pair of swivel bucket seats. They orig came on the mid 70s a body cars as a option. I've had them for a couple of years for my 55 chevy HT but I'm selling it instead. Only problem is because of their bulk I can't ship. They're complete but need recovering. Gene