Make yourself a much nicer rod (and then you won't need the bushing) using Napa part #732-1129 (female spherical rod end) combined with the proper exhaust stud that you'll figure out in the nuts and bolts section. The bushing (if you really need it - but you won't with the above setup) is Chevy part 387-2955 (this is a two piece pack of C-2 or C-3 Corvette rear sway bar bushings) - still available at the Chevy parts counter. The spherical rod end is truly a great piece in this application with nice, smooth clutch application. The bushing is also the same piece for the upper clutch rod where it inserts into the Z-bar and can be changed on the car using the old bolt-through-a-socket press routine.
I have the correct bushings in stock There is more info on these and other Transmission Related parts here > https://www.diecastmusclecars.com/BuickTransmissionPage.htm .
Todd- the clutch pedal rod that is "coming soon"... Is that going to be the correct length big block Buick one or the 14.xx" small block one? TY
I'm working on getting the correct length one. ( 15 1/4" ) - I believe I do already stock the one that is 14 7/8". (IF needed) At some point I hope to have both