Location 18847 Susquehanna, PA For sale one used Robb Mc 550 horse fuel pump with ARP mounting bolts. $130.00 plus shipping. Postal money order. Thank you, George
Jon and all board members, if the engine and all components have 5 hours of total idle/run time I would be on the high side. This 462 was built in 2004 and has not been on the strip and perhaps 10 miles on the street. It has sat in my Regal in the garage since 2005. The rocker arms/pushrods and valve stems still have assembly lube on them. I purchase the fuel pump/starter motor and TA ST 1 SE heads brand new. I am parting the engine out as I have a finished Skylark with 464 ST2 engine. Feel free to ask any questions on any components I have or will be listing. No lies or obfuscation on my part ever. George
Jon, would you send me your ZIP to figure shipping. Thanks, George ---------- Post added at 02:15 PM ---------- Previous post was at 02:04 PM ---------- In order of interest Hound Dog forever (Jon Baker) shipping $12ish Big Joe (Joe Medrano) shipping $12ish eganddg (Dave) shipping $6ish Shipment via USPS onless otherwise requested. Thank you, George
My business address is 97009 in the thriving town of Boring Oregon. I will take it. Let me know how you want payment. Paypal or ? thanks Jon
Jon, looks to be $11ish USPS parcel post unless you direct other wise. I will PM you on payment. Sold to Jon Baker. Thank you, George
Just dropped the payment off in the mailbox. Depending on weather, postal days off and the phase of the moon, it should travel across country and arrive by Saturday, maybe monday. thanks
Just received the fuel pump. Looks like that will work just fine. Just a word of caution for the next time tho, you need more packing around it. Looks like it was dropped and the little brass fitting out the side got a very little bit smashed. It will not affect it at all, but after just reading a thread about a shroud that was broken during shipping, I thought you would like some feed back. Thanks again, I'm slowly getting all my parts together, then I just need the cash for machine work. jon
Jon, thank you for the feedback. Send me a picture of the fitting or the size and I will replace it. I owe you the mounting bolts that I forgot to put in the package. George
TA SE 1 heads Are you selling the heads also?? How much, any imporvements? Building my first BBB 455. Let me know, PM. BTW your email is full.
As you can see, it is very small and doesn't affect the thing at all. Just a little flat on the end and it doesn't distort the rib so it will still grip and seal just fine on the hose. I really only mentioned it because of the other thread about shipping. thanks for the offer but it really doesn't need to be swapped out. If you want to drop the mounting bolts into the mail, that would be great. Thanks again. Jon
