Here's a nicely restored Big Block Steering Shaft I recently finished. Details as follows: >Completely disassembled, cleaned, beadblasted, etc. >Black parts primed with epoxy (PPG DP90 2 part/catalyzed out of a spray gun...no spray can stuff) >The shaft had some pitting in it..... I filled and sanded it. >Reprimed shaft >Final paint on shaft...a satin black finish >Upper Bell cleaned, beadblasted primed and painted >Lower cast piece refinished in a darker cast grey with a replated pinch bolt >Upper Bell Clamp and Bolt replated, new zinc plated lock nut >NEW RUBBER BOOT/SEAL INSTALLED with original clamp Final greasing and installation of upper bell to shaft with clip will be done once it's sold. Overall a VERY NICE PIECE and show worthy. I do all the work myself..... I am very thorough and use topnotch materials. $175 + shipping. Post your interest here on the thread. Thanks
