Where can I send my gauge cluster and tach and get someone to look at it and repair if needed. One of the little pins where the harness hooks to the gauge cluster was bent badly,I straightened it up but it may break off when I plug the harness on it. As far as I know the tach works, problem is I have a HEI now and this tach is the factory in dash tach, if it will work how should I go about wiring it and making it look as factory as possible. The underhood harness was replaced several years ago but there is no hookup for the tach(I dont think). Thanks for any help.
Thee are several vendors in Hemings that will do this. Howver there is often a flat fee for the intial looksee and you might just consider buying a repro: www.thepartsplaceinc.com