Removing the rear seat

Discussion in 'The Bench' started by Jim B., Nov 4, 2004.

  1. Jim B.

    Jim B. Well-Known Member

    I'm gonna start looking for my build sheet but I need to know how to remove the rear seat.
     
  2. GStage1

    GStage1 Always looking for parts!

    You have to push the lower cushion back then up to release it from the seat catches. Be prepared to make several efforts to do this as it is not easy.
     
  3. 68 LeSabre 4dr

    68 LeSabre 4dr Well-Known Member

    As George said above . There is 1 catch on each side . I usually move the front seat all the way up , put both hands at the very bottom of the seat at the carpet area .

    You will push Very hard till you think a blood vessel broke in your forehead in some cases .

    You have to PUSH and then lift up to free each side .

    Good Luck .... Wake us up when you get it !

    :laugh: :sleep: :sleep:
     
  4. Dale

    Dale Sweepspear

    Push back, down, and up. All at the same time. :grin:

    A small child and a fire ax may come in handy.

    Actually, sometimes you get a car that it is quite easy to do, and others.....
    [​IMG]
     
  5. Jim B.

    Jim B. Well-Known Member

    Thanks guys
     
  6. gstewart

    gstewart Well-Known Member

    u realize that there are many other places to look for the build sheet. for example - on top of gas tank, in the backseat (upper or lower) in the springs or under the covering, under the "A" pillars, in the dash , etc.... mine was on top of the gas tank.
     
  7. 72 pet chicken

    72 pet chicken i dont wanna be a pirate!

    can someone post their build sheet? i think i may have found a blank one under the carpet.

    pete
     

Share This Page