Qjet jet ???

Discussion in 'The Venerable Q-Jet' started by MandMautomotive, Feb 23, 2004.

  1. MandMautomotive

    MandMautomotive Well-Known Member

    Ready?
    If you run a 74 jet with a 44 rod and switch to 76 jet with a 46 rod would there be a differance?
    Not a test, maybe a waste of band width.
    John
     
    MandMautomotive, Feb 23, 2004
    #1
  2. Leviathan

    Leviathan Inmate of the Month

    Yes.

    The metering area will stil be the same, but at WOT (when the rods are all the way out of the jet) you'll flow slightly more.
     
    Leviathan, Feb 24, 2004
    #2
  3. joejbal

    joejbal Well-Known Member

    the metering area will be slightly larger., approx 4 percent. but that is most likely not noticeable
     
    joejbal, Feb 24, 2004
    #3

Share This Page