Anyone put a Fuel pressure guage between the stock line and carb inlet without cutting/splicing the line? I'm looking to put a guage in line that will be hidden by the air cleaner, but I don't want to cut/splice the original metal line. Any Idea's..... o No: VinMan out.....
Vin, I don't think that is possible. The pressure reading has to be taken in line and close to the carb. I suggest you buy another steel fuel line, cut it and put in a pressure tap. Then run a line and gauge, and tape it to the window. Use it to check your pressure at various throttle openings, and then reinstall your original fuel line after you're done testing.
Larry, Where can I buy another factory type line, I'll go do some search's, but I would guess the all knowing what would some of us do without him Larry will know..... :TU: :TU: :TU: VinMan out...
