Need help with this one: At low speeds, the power steering cuts in and out and squeeks like hell when you turn at more than say, 45 degrees (like turning into a parking spot.) The fluid level is full. Any ideas? Maybe I should take off a line and flush the system or something? Which line would I take off?
For starters, have you made sure the belt is tight? If it slips it'll squeal and its most likely to slip when you're putting alot of load on it such as turning sharply at low speeds.
Ok, it's fixed. The belt was pretty tight to begin with, so I got a friend and used a long bar and now it's REALLY tight. I also took off one of the hoses from the steering box and used some teflon tape on it because it was leaking. Thanks! :TU:
