I bought a power lock setup from a guy but he had cut the harness and only left the part which connects to the switch and the selenoid. Does anyone have a diagram or a picture of the power lock harness setup? Or even better an intact harness for a 2 door 70 GS. I found this harness on EBAY: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34206&item=4508174009&rd=1 but its from a 4 door skylark. wonder if that would work. It also looks like the harness ties in with the power window harness. If someone could help me out some way it would be much appreciated.
2 and 4dr will have the same harness....but the wire length to the solenoids for a 4dr will have a shorter power wire. Not a big deal, just splice in some additional wire w/solder and shrink tube the joints closed. The harness for PDL is seperate but runs the same path as the PW harness
