Is there a sequence to adjusting pushrods from poston. and how much lash should there be. Just a little green... o No:
yes there is, but i dont have that info right here, you adjust each pushrod at the valve fullly closed point, i tighten them just till there is resistence when you roll then in your fingers, then i turn one more turn, and then tighten down the lock nut. make sure you snug them down good or they will loosen up.
1/2-3/4 turn past 0 lash. The lifter should be on the heel of the cam when making the adjustment. I Have used this procedure several times with good results.